Any homeowner who has experienced a malfunctioning garage door would account for an experience that is not only taxing but daunting as well.
While appearing to be a simple and straightforward machine, garage doors are anything but that.
It has so many components to familiarize oneself with, and that does not begin to cover the heap of parts with names as similar and complicated as the next one.
While the most handsome prospect to getting things done immediately is to call on the help of a seasoned professional from one’s nearest garage door company, the rates, most of the time, aren’t as friendly as one would think.
Sure others offer reasonable rates but are we sure that they’re worth the investment?
It is because of this that other homeowners have taken it upon themselves to do the repairing.
For those who pride their prudence in avoiding wasteful expenditures, there is nothing more daunting than losing money on an investment you thought you would reap big.
Considering this, we have curated a list that could summarily alleviate one of the most common problems that garage owners face.
Forthwith, here is a list of helpful tips on how to install garage door cables most efficiently and safely.
Prepare the tools.
In this project, the first thing that has to be done is to prepare the tools.
On how to install garage door cables, you will need to get a vice grip, your replacement cables, some winding bars, wrenches of various sizes, some sockets with multiple fittings, some protective gloves, and a protective eyewear.
Evaluate your garage door for replacement.
Before thinking of installing the garage door cables, you should consider the garage door size as well as the size of the cable.
The size of the cable that you need will have to depend on the size of the door as well.
You will have to determine whether the garage door is a standard lift, a high lift, or a vertical lift.
Residential garage doors are usually standard-lift, so the cable size that you will use will depend on the height of the garage door plus eighteen inches.
Remove the garage door.
The first thing that has to be done when installing a new garage door cable is to remove the door.
To do this, you should pull on the release cord that is used to disconnect the door from the opener.
Releasing the door must be done first otherwise, the door will fall or crash down, which could damage the property and injure you, not to mention damage the garage door itself.
Utilize a vice grip below the roller that is located on the bottom of each side of the door.
Do this so that the door will stay open while the cables are pulled loose.
Stay alert as there might be some sharp edges as well as frays that may cut you.
At the center, simply unfasten the screws that were set on the springs.
For safety purposes, insert the winding bars fully while utilizing them both simultaneously.
Make use of a wrench so as to loosen the screws that were set on the cable drum, which is turn, located on the door’s far top left.
Then, unwind the cable from the cable drum.
Go to the area near the proximity of the bottom of the door and then use a ratchet as well as a socket to detach the screw in the bottom lag.
Just remove the bracket at the bottom and then pull the garage door cables out of the bracket.
Install the new cables.
Get the new cables and then proceed to install them on the garage door, beginning with the bottom bracket.
Simply pull it up to the cable drum that is situated on the top left.
Repeat for the other side.
Next, wound the cable into the cable drum. Turn the cable clockwise until it is fastened.
Call for professional assistance.
If the above steps on how to install garage door cables are much too complicated for you, it is best if you call for professional assistance.
Our services will be honored to offer the best of our repair and installation services.
Contact us today to know how we can be of assistance to you and your garage door.
Call us now!