How To Adjust Garage Door Tracks

    Garage Door trouble again?

    We deal with garage door Services in Philadelphia on a daily basis.

    Our phone ☎️ (267) 651-0259

    Or drop us a line.

    Send some images.

    Commercial Garage Door Motor Repair

    Track alignment helps keep the door panels in place.

    Since the garage door consists of many heavy panels, it needs proper alignment to travel in line properly.

    Consider the door tracks as the guide of the door panels that travel up and down the frame.

    Misaligned tracks can lead to binding doors.

    The doors will be difficult to open and close along the tracks.

    If the door comes off the track, this is where the real safety concerns start.

    This scenario can cause emergencies in the garage.

    Misaligned tracks can also cause the door rollers to damage over time.

    Let this guide teach you how to adjust garage door tracks so you’ll have well-guided door panels in the future.

    Adjusting to the rollers

    One way to adjust the track is to fit the rollers in the tracks well.

    Make sure that all rollers are in place before opening or closing the garage.

    Step 1: Loosen the vertical track

    Take out the screws or loosen the nuts and bolts that hold the tracks to the frame.

    Use a screwdriver or a wrench to pry the tracks loose.

    Step 2: Move the tracks with the rollers

    Check each roller of all the door panels and make sure they’re inside the tracks.

    Shift the tracks left and right until there is only a small gap between the floor and bottom of the bottom-most sectional panel.

    Step 3: Make sure to level the vertical tracks

    Check the alignment of the vertical tracks.

    Use a vertical level and adjust the alignment of the vertical tracks.

    Step 4: Secure the track bracket

    Secure the tracks again by tightening the screws or nuts and bolts.

    Make sure that all parts of the tracks fit in the new position.

    Adjusting to the weatherstripping

    The weatherstripping is a protective layer in the garage.

    It keeps rainwater, air leaks, and insects out of the garage, and sometimes, the tracks stray further from the weatherstrip.

    Step 1: Loosen the vertical track

    Take out the screws or loosen the nuts and bolts in the frame.

    Use some tools like a screwdriver or a wrench to loosen the tracks from the frame.

    Step 2: Find leaks in the frame

    Inspect for some air leaks on all sides of the panels.

    Mark all areas with air leaks; these are the spots where you need to adjust the tracks to the weatherstrip.

    Step 3: Line up the door against the weatherstripping

    Adjust the tracks in the area where there are air leaks.

    Shift the tracks left or right, and fit the panel until there are no significant leaks present.

    Step 4: Secure the track bracket

    Check for the new vertical alignment of the tracks that adjusts to the weatherstrip.

    Tighten all the hardware of the tracks again.

    Adjusting to the overhead track

    Sometimes, it’s the overhead track that needs the adjustment changes.

    Adjust the overhead tracks to keep the door panels fit when the garage is open.

    Step 1: Manually close the garage

    Disengage the garage door from the opener.

    Lower down the door manually and carefully.

    Step 2: Loosen the overhead tracks

    The overhead tracks have bolts or screws that keep them in place in the frame.

    Loosen the hardware so you can move the overhead tracks freely.

    Step 3: Reposition the overhead tracks

    Step up on a ladder to adjust the height of the overhead.

    Move the overhead track up and down slowly.

    Step 4: Test the new adjustment of the overhead

    The new position of the overhead track should be an optimal height for the door panels.

    Tighten the hardware of the overhead and test open the doors in your garage.

    Set an appointment with Garage Doors Philly for track adjustments

    Track adjustments can be dangerous and time-consuming.

    When you have other things to do, it’s best to ask for help from the experts.

    We are Garage Doors Philly, and we provide you with garage door repairs in Philadelphia.

    As tracks guide the garage door up and down the frame, a misaligned track can lead to some door panels not getting enough support in their movement.

    Slanted door tracks can lead to falling doors and broken rollers.

    If you need help, our team is always ready to give you track adjustments.

    Our team knows how to adjust garage door tracks efficiently.

    If you’re looking to replace your door parts instead, our garage door installation in Philadelphia isn’t only for brand new doors.

    We install any part of the mechanism as well.

    Set a date with our team!

    Rate this post

    Recommended articles

    Contact Us
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar